English
Produce Taste Introduction :
The first 500 special sealing primer is a modified acrylic primer that can effectively protect the latex paint from the wall. It can resist the invasion of chemical substances inside the body and has strong permeability and anti-powdering ability. It can make the topcoat easy to apply and the coating Plump. Strong alkali resistance, can prevent the topcoat from changing color. Strong adhesion, water and mildew resistance, easy construction, and at the same time certain Hiding power, saving topcoat.
Product use:
Primer for exterior wall coating, closes pores, strengthens wall dust, improves topcoat adhesion, and prevents topcoat from being damaged by poor Base layer erosion.
Paint consumption
Volume : about 4 m² / kg ( one road ) .
(The actual paint consumption will vary depending on the construction method, construction conditions and substrate conditions)
Recoating time :
More than 2 hours/25℃, apply topcoat within 7 days. (Drying time will vary with ambient temperature and humidity)
How to use :
Can be applied by brush, roller or spray.
Note: Dilute with water if necessary.
It is recommended not to dilute to ensure a good sealing effect.
If the substrate is loose, no more than 20% of clean water can be added to dilute it for easy construction. For ordinary spray guns, dilute with no more than 20% water.
(The dilution ratio needs to be adjusted appropriately according to the ability of the wall to absorb paint at different powdering levels)
Construction conditions :
Construction at temperatures above 5°C and relative humidity below 85%, wall moisture content below 10%, PH The value is less than 10.
Instructions for use :
The wall must be dry, and any defects on the wall surface must be removed and repaired before painting.The wall surface must be firm, clean and smooth, and there must be no leakage. It is recommended not to add water to improve the use effect.Moldy and mossy surfaces must first be cleaned with a bactericidal cleaner.Note: It can be made into concentrated type according to customer requirements. When using, add water to dilute it. The amount to be added is 10~20%. for 8 ~ 12 m²/kg ( one road).(The actual paint consumption will vary depending on the construction method, construction conditions and substrate conditions).