English
Product Introduction :
The first multifunctional acrylic exterior latex paint has excellent mildew resistance and alkali resistance, outdoor durability and long-term decorative function. Suitable for new construction and maintenance of large buildings such as residences, hotels, office buildings, schools, etc. Decoration and protection of interior and exterior walls such as concrete, cement and brick walls.
Features :
◆Excellent weather resistance, long-lasting protection and decorative effects.
◆Good alkali resistance to prevent paint film from powdering and fading.
◆Excellent anti-mildew and anti-algae performance.
◆The paint film has excellent waterproof, water-resistant and washable properties.
◆Strong covering power, smooth paint film, easy construction.
◆Has excellent adhesion.
Paint cloth quantity :
Theoretical value: 10～12 m²/kg/layer
(The actual paint consumption will vary depending on the construction method, surface hardness and roughness, and construction environment)
Recoating time : 2~4 hours/25℃.
(Drying time will vary with ambient temperature and humidity)
How to use: Paint brush, roller or ordinary spray gun.
Diluterelease:
Dilute with clean water, dilution amount 10%~20%.
(The dilution ratio needs to be adjusted appropriately for different numbers of coats of paint according to the ability of the wall surfaces to absorb paint at different powdering degrees)
Yan color : A variety of standard colors are available.
Construction conditions :
Construction at above 5°C and relative humidity below 85%, wall moisture content below 10%, pH value less than 10. Construction is strictly prohibited in rain, strong winds or below 0℃.
Instructions for use :
Before painting, the exterior wall must be firm, dry, clean and free of dust. Repair any large uneven areas on the wall. If the paint cannot fill the small holes and cracks, you need to use professional exterior wall putty to fill them (try to fill them locally). After drying, use sandpaper to smooth it. If it is an old wall, be sure to clean the dust , old paint and moldy moss on the wall . After cleaning, roll on a suitable primer (it is recommended to use the first multifunctional primer for old walls and the Dibo 500 special closed primer for new walls). Paint), and then apply two coats of topcoat (one primer and two sides).