English
Product Introduction:
The first high-grade acrylic elastic latex paint has the functions of waterproof, crack resistance and easy to wash stains.It is suitable for the construction and maintenance of large buildings such as residences, office buildings, and schools. It can also be used for the interior of buildings. It is suitable for decoration of walls, ceilings, gypsum boards and wooden partitions, and is especially suitable for painting wall surfaces with fine cracks.
Features :
◆Excellent scrub resistance, stains on the paint film surface can be easily washed off.
◆The elastic paint film can cover the fine cracks on the wall.
◆Excellent vertical wall waterproofing function can prevent external water from penetrating and corroding concrete and cement walls.
◆The paint film is smooth and the construction is simple and convenient.
◆Excellent anti-mildew, anti-algae and alkali resistance, and excellent weather resistance. Non-toxic, no bad smell, in line with environmental protection requirements.
Paint cloth Quantity :
Theoretical value 0.45～6 m²/kg/ Layer (Dry film thickness 70 microns)
(The actual paint consumption will vary depending on the construction method, surface hardness and roughness, and construction environment. In addition, when choosing different coating thicknesses according to needs, the paint consumption will vary.
The amount will vary greatly)
Recoat time :
3 ~5 hours/25 ° C.(Drying time will vary with ambient temperature and humidity)
Directions : Paint brush , roller, airless spray gun.
Dilution: To ensure that the paint film has elasticity after construction, it is best not to dilute it with clean water. If it is necessary for painting, the dilution amount must be controlled and do not over-dilution.
(The dilution ratio needs to be adjusted appropriately for different numbers of coats of paint according to the ability of the wall surfaces with different powderization degrees to absorb paint)
Color : A variety of standard colors are available.
Construction conditions :
Construction should be carried out at temperatures above 5°C and relative humidity below 85%, with wall moisture content below 10% and pH value less than 10.
Instructions for use :
Before painting, the exterior wall must be firm, dry, clean and free of dust. Repair any large uneven areas on the wall. If the paint cannot fill the small holes and cracks, you need to use professional exterior wall putty to fill them (try to fill them locally ). After drying, use sandpaper to smooth it. If it is an old wall, be sure to clean the dust, old paint and moldy moss on the wall. After cleaning, roll on a suitable primer (it is recommended to use the first multifunctional primer for old walls and the Dibo 500 special closed primer for new walls). Paint), then apply two coats of topcoat (one base and two sides).