English
Product Introduction:
Which is made of high-quality imported materials and international cutting-edge technology. Suitable for exterior wall decoration projects of buildings such as homes, hotels, office buildings, factories, schools, and dormitories.
Features :
◆Good alkali resistance and mildew resistance to prevent paint film from powdering.
◆Good weather resistance, strong color retention, beautiful color.
◆Strong adhesion to solid surfaces.
◆Excellent water resistance.
◆Simple construction, smooth paint film and strong covering power.
◆Non-toxic and tasteless, green and environmentally friendly products, excellent performance-price ratio
Paint cloth Quantity :
Theoretical value 8~10 m²/ kg / layer
(Actual paint consumption quantity Will be due to Shi work square Method, surface drying hard Procedure Spend and thick rough Spend and Shi work ring territory and have Difference different )
Recoating time : Recoating time: 2~4 hours/25℃.
(Drying time will vary with ambient temperature and humidity)
How to use :
Paint brush and roller.
Dilute release : To ensure the best coating effect, it is recommended not to dilute.
If dilution is required for painting, dilute with clean water. The maximum dilution amount shall not exceed 5%.
The dilution ratio needs to be adjusted appropriately for different numbers of coats of paint according to the ability of the wall surfaces to absorb paint at different powdering degrees )
Yan Color: According to customer needs.
Construction conditions :
Construction should be carried out at temperatures above 5°C and relative humidity below 85%, with wall moisture content below 10% and pH value less than 10.
Construction is strictly prohibited in rain, strong winds or below 0℃.
Instructions for use :
Before painting, the exterior wall must be firm, dry, clean and free of dust. Repair any large uneven areas on the wall. If the paint cannot fill the small holes and cracks, you need to use professional exterior wall putty to fill them (try to fill them locally). After drying, use sandpaper to smooth it. If it is an old wall, be sure to clean the dust, old paint and moldy moss on the wall . After cleaning, roll on a suitable primer (it is recommended to use the first multifunctional primer for old walls and the Dibo 500 special closed primer for new walls). Paint), and then apply two coats of topcoat (one primer and two sides).