English
Physical properties
Color / Matt orange-yellow transparent / Matt
Volume solid content 40%
flash Point >25 ℃
Volatile organic components ( VOC ) about 563 gram / L
Density per litre 0.9 gram / centimeter 3
Dry film thickness ( μm ) | Wet film thickness ( μm ) | Theoretical coating rate ( m2 / L ) | |
Film thickness range | 15 – 40 | 38 – 100 | 26.7 – 10 |
Recommended film thickness | 25 | 63 | 16 |
Construction instructions | ||
Apply by brush or roller | Applicable, dilution ratio 0-5% | |
Airless spraying guide data | Nozzle pressure: 12-15 MPa | Nozzle aperture: 0.46-0.58 mm |
Air Spray Guide Data | Spraying angle: 40-80 Spend Dilution ratio: 0-3% (volume ratio) Nozzle pressure: 0.3-0.5 MPa | Nozzle aperture: 1.2-2.0 mm |
Dilution ratio: 0-5% (volume ratio)brush or roller application , dilution ratio: 1-10% (volume ratio )
Thinner / Cleaning Agent 601 Special diluent
Avoid adding excessive thinner, otherwise it will reduce its anti-sagging and gloss of the coating.
Transocean Rust Oil 1.03
Surface treatment
According to SSPC-SP1 , use solvent to remove all grease on the surface; remove welding residue on the surface and grind the weld and sharp edges with appropriate methods; sandblast to Sa2.5 level Steel( ISO8501:1 ).
The steel surface should be painted immediately after being sandblasted to the specified requirements.
Construction conditions
The surface temperature of the substrate should be at least 3 °C higher than the air dew point temperature, and the relative humidity should not exceed 85% (the temperature and relative humidity should be measured near the substrate).
The surface temperature of the substrate should not exceed 40 ° C. Otherwise, a suitable spraying method should be selected and appropriate diluent should be added as required to prevent dry spraying. In extreme cases, the dry film thickness of the coating can be appropriately reduced to prevent sagging.
When painting in a confined space, proper ventilation should be provided to ensure the paint film cures. The paint temperature must be above 15 °C, otherwise thinner should be added to achieve the required viscosity for construction.
Recommended Package
TO1.03 anti-rust oil 1 × 25μm (dry film thickness )
Store
Must be stored in accordance with national regulations. The storage environment should be dry, cool, well-ventilated, avoid high temperatures and stay away from fire. The packaging container must be kept sealed. The storage validity period is at least 12 months.